Timeguard 360 degree Flush Mount Linkable Mini PIR Sensor PDFMMINIL

Timeguard Mini design (47mm diameter) for corridor and multi-zone use with Twist & Lock design for easy access. Linkable pre-wired RJ11 plug-in slave units allow quick installation with up to 5 slaves to one master unit.

Designed for corridor and multi-zone use.
Mini unobtrusive design (47mm diameter).
Detection: 360 degree.
3 metre presence detection.
8 metre motion detection.
Twist & Lock design for easy access.
Pre-wired RJ11 plug-in slave units for quick installation.
Linkable. Up to 5 slaves can be added to 1 master.
Load: halogen max 1000W, LED max 250W.
LUX adjustment: 5 - 1000 LUX.
Time adjustment: 30 seconds to 30 minutes (master only).
Termination box for ease of wiring.
Masking kit included.
LED indication.
IP40 weatherproof rating.

SPECIFICATION

Operating Voltage	230V AC, 50Hz
Class Rating	Power box Class 2, PIR Sensor Class 3
Total PIR Switching	2300W Halogen, 500W Low loss balance fluorescent, 250W Electronic balance fluorescent, CFL and LED Lighting
Weatherproof Rating	Power box IP20, PIR Sensor IP40
Operating Temperature	-20 degree C to +40 degree C
Motion Detection Range	8m Diameter at a 2.5m mounting height
Presence Detection Range	3m Diameter
Angle of Detection	360 degree
Time ON Adjustment	30 Seconds to 30 Minutes
Warm-up Time	60 Seconds
Lux (Light) Level Adjustment	10 to 2000 Lux
Manual Override Mode	Double pulse within 2 seconds to enter 6 hours ON time
PIR Sensor Connection Cable	Pre-fitted 250mm long cable with an RJ11 connector
Ceiling Cut-out	40mm Diameter hole
Overall Dimensions	Power box H=35mm, W=175mm, D=35mm, PIR Sensor 47mm Diameter body, 64mm height
EC Directives	Conforms to latest directives

Multiple PIR Sensor Switching: A maximum of 5 PDFMMINILS Slave PIR sensors can be linked to the PDFMMINIL Master PIR, to enable any detector to turn ON all the lights connected (The total load must not exceed the lamp rating of a single PDFMMINIL unit).

Product Code: PDFMMINIL